Do you have lights in your home that dim when the refrigerator kicks on? Have you ever felt a slight shock when you touch your stove with wet hands? These are just two situations that should be looked at by an electrician. I didn't give any attention to the lights that were dimming in my laundry room when I turned my dryer on. A few months after I had noticed it, we had a small electrical fire in the ceiling. To find more home electrical symptoms that shouldn't be ignored, visit my website. Here, you will find symptoms, problems and solutions for each.
Do you have a machine in your business or shop that runs on an electric motor? Is it something like a generator, a welding machine, or some kind of drill or shaft? If so, then you likely know how important that motor is not only to the machine, but also to your entire shop. If the motor dies, you'll have to shut the machine down until you can have the motor repaired or replaced. That could cost you valuable production time. Fortunately, there are a few warning signs that you could be facing impending motor trouble. Do a visual check of your machine and look for these three signs. If you notice them, it may be time to schedule an electric motor service call:
Cracked bolt holes. As you inspect the machine, check the bolt holes on the machine's exterior, especially around the mounting area. Do the bolt holes have any cracks, corrosion, or other damage? If so, that could be a sign of excess vibration. When the machine vibrates too much, the bolts bang against the edges of the bolt holes, causing cracks. One source of the vibration could be the motor. If it's not running smoothly, then it could be sending vibrations through the rest of the machine's belts, gears, and other system elements. You may want to have a service technician inspect the motor to see what's causing it to run rough.
Dirty casing openings. In most machines, you can get a good look at the motor casing, which should have a few openings in it. Look at those openings to see whether there's a buildup of dust, dirt, or other grime. If so, then you probably have the same amount of dirt on your motor. Dirt and grime can be a big problem in most motors as it can restrict bearings and gears from working smoothly. If the casing looks dirty, then it may be a wise decision to err on the side of caution and have an electric motor service company come out and clean your motor.
Paint that is burnt. Also, when you're looking around the motor casing, examine the paint. Does it look burnt? Can you smell a burning odor around the casing? This could be a sign that your motor is overheating, which is often the last sign you'll get before it breaks down completely. Your motor may need new oil or there could be a more serious problem. An electric motor repair company can inspect the motor to find the source of the problem.
If you notice any of these issues, call an electric motor repair company. They can help you find the source of the problem and get it resolved quickly. Talk to experts like Hackworth Electric Motors Inc for more information.