Do you have lights in your home that dim when the refrigerator kicks on? Have you ever felt a slight shock when you touch your stove with wet hands? These are just two situations that should be looked at by an electrician. I didn't give any attention to the lights that were dimming in my laundry room when I turned my dryer on. A few months after I had noticed it, we had a small electrical fire in the ceiling. To find more home electrical symptoms that shouldn't be ignored, visit my website. Here, you will find symptoms, problems and solutions for each.
If you are planning on adding a room to your home, you will need to consider the electrical work of the room. This is one of the first things you need to plan for the new room, since there are so many electrical uses for even a small room. Here are some electrical considerations to keep in mind for a new room.
Outlets and Switches
The first thing to plan out in the new room are the outlets and switches. Consider the side of the room and what its purpose is when you plan on how many outlets you will need, as well as switches for those outlets. For example, if the room addition will be a home office, you might need more outlets than you would for a bedroom. Knowing what the room is used for also helps you decide the locations for the outlets. If there is one long wall in the room, the bed will most likely be placed there, so it's not a good place for an outlet. Map out where the outlets should go before you begin.
Ground Circuit for Computers
Whether this room is used for a bedroom or office, it is a good idea to add a ground circuit for the use of a computer. With an isolated ground circuit, it will protect the computer and data. After installing the ground circuit, make sure you plug the computer and other computer equipment into a surge protector, not directly into the outlet. This will prevent power surges that could cause major failure of computer equipment.
Heating and Cooling
Don't forget that you will want your home's heating and cooling system to include this new room. Make sure you plan out the electrical components needed for heating and cooling. This may include installing an additional thermostat if it is needed, or simply adding the vents and ductwork needed to supply heating and cooling to the new room. You may also be able to use baseboard heating, though this will depend on the room and how the HVAC system is laid out in your home. You can contact an HVAC professional to discuss your options.
Lastly, consider adding ceiling fixtures to the new room. Of course, this will depend on where the room is located. If it is in a basement or attic, this probably isn't an option. However, other rooms in the home or room additions to the exterior of your home should have sufficient space for adding ceiling fixtures. This may include ceiling lights or chandeliers, or ceiling fans. It can be beneficial having a lighting source on the ceiling, especially in a room with little space. It prevents the need for a lot of lamps to supply adequate lighting. Contact an electrical contractor for more information.