Do you have lights in your home that dim when the refrigerator kicks on? Have you ever felt a slight shock when you touch your stove with wet hands? These are just two situations that should be looked at by an electrician. I didn't give any attention to the lights that were dimming in my laundry room when I turned my dryer on. A few months after I had noticed it, we had a small electrical fire in the ceiling. To find more home electrical symptoms that shouldn't be ignored, visit my website. Here, you will find symptoms, problems and solutions for each.
Does the circuit breaker to your furnace trip all of the time and cause the pilot flame to go out? A furnace is a high voltage piece of equipment that demands a lot of electricity, and there are several reasons why it may be tripping the circuit breaker. Find out below about the possible reasons why the circuit breaker to the furnace constantly trips, as well as how an electrician can resolve the problem to keep your home safe.
What Can Lead to the Circuit Breaker to a Furnace Turning Off?
If you recently invested in new electronics and plugged them in, it is possible that you have gone beyond the amp capacity of your electrical panel. You can try unplugging the new electronics for a day to see if the circuit breaker to the furnace stops tripping. You may have an electrical panel that was not designed for modern power demands if you are living in an old house.
It is also possible that the furnace is causing the circuit breaker to trip because of something wrong with how it functions. For instance, the power cord to the furnace may be damaged or have a short in it. If you have rodents in your house, they may have chewed up the cord. You must get the tripping breaker examined by an electrician as soon as possible, as leaving it as it is can lead to a fire.
How Can an Electrician Resolve a Tripping Circuit Breaker Problem?
When the electrician performs an inspection in your home, he or she will determine if there is a short in the power cord to the furnace. It may also be possible that the circuit breaker has a short in it or is damaged in some way, which means that it will have to be rewired. If the furnace cord is damaged, you will need to get a new one installed.
The electrician may find that the wiring in the outlet where the furnace is plugged in is damaged from overheating. If that is the case, it is likely that you need a new electrical panel to provide more amps for your home. An electrician will have to repair the damaged outlet, and he or she can also install a sub-panel or upgrade the electrical panel. Make sure that you get in touch with an electrician as soon as possible to get the tripping circuit breaker problem under control. Some electricians that offer a 24 hour electrical service may also be good to keep on hand for safety.