Do you have lights in your home that dim when the refrigerator kicks on? Have you ever felt a slight shock when you touch your stove with wet hands? These are just two situations that should be looked at by an electrician. I didn't give any attention to the lights that were dimming in my laundry room when I turned my dryer on. A few months after I had noticed it, we had a small electrical fire in the ceiling. To find more home electrical symptoms that shouldn't be ignored, visit my website. Here, you will find symptoms, problems and solutions for each.
Homes are filled with complex and intricate wiring systems, especially those homes with a lot of electrical appliances. These appliances often suffer from frayed wires, which puts you and your family at an increased fire risk. Here's how to check for and fix this problem.
Occurrence Of Wire Problems
Burning wire smells indicate one of the most common and dangerous electrical problems in a home. According to one study, bad wiring is the most common cause of fires in the country. A big part of this is due to poor wiring done long ago, when standards were less precise. However, frayed wires in electrical appliances can also occur, especially in items you've owned for several years.
The smell of burning wires may come and go throughout the day, depending on when those wires are being used. Keep track of when the smell occurs to get a better feel for what electrical appliances may be impacted by frayed wires.
Devices That Are Impacted
If you are smelling burning or frayed wires, you need to pin-point the exact device that is being used. Sometimes this scent comes from your heating and ventilation or HVAC system. If this is the case, you will need to trace the smell out through the HVAC system by following the vents until you locate an area which may be producing the scent. Removing the cover from these areas is then necessary, as you try to locate any frayed wires. The exact method will vary, depending on your system.
However, burning smells are also likely to come from self-cleaning ovens, overheated fuse boxes, and even overburdened computer systems. Frayed wires can occur in any of these items and they are a spark and fire hazard that needs to be fixed as soon as possible. Remove the covers on any item you expect may have frayed wires, following the instructions that came with the item. Look for the section with wires (will vary depending on the item) and look for any wires that are worn through and frayed.
What You Can Do
If you have located frayed wires in your electrical systems, you can do a simple repair by carefully splicing the wires back together and wrapping them with electrical tape. You should turn off the power source to this area while you work to avoid fire and electrocution risk. Basically, you are going to carefully mesh the wire back together until the insulation is lined up and then wrap the wire with your tape.
It is also possible to cut and re-splice the wire to patch it around the damaged area. This requires adding a new bit of wire as a connector and is typically a little tough for anyone without real electrical experience. It might be best at this point to call a professional licensed electrician. They will do the hard work for you and ensure that you and your family are safe. Visit http://www.advantageelectricians.com for more information.